Description

JLD Bridge System – Brass Pin Mount Version

Guitar strings constantly pull your acoustic guitar’s bridge up and forward, with a force of approximately 250 lbs. Over time, the tension causes the top of your guitar to warp out of shape. This is usually referred to as bowing or “bellying” of the soundboard – The JLD Bridge System has been designed to fix this problem. It installs easily through the soundhole in minutes and requires no modification to your acoustic guitar.

The JLD Bridge System consists of three separate parts; the mounting block, tension rod and 6 brass bridge pins.

The JLD Bridge System uses a brass pin instead of a screw to attach the mounting block, using the plastic post, under the bridge. There are six brass pins included. The tension rod is then installed between the mounting block and the tail-block of the guitar. The grub screw is then tightened against the tension rod. This added tension, applied by the Bridge System to the bridge, counteracts the pull of the strings and the warpage of the top.